1、招标条件
项目概况:剑杆织机采购
资金到位或资金来源落实情况:自筹、已落实
项目已具备招标条件的说明:本招标项目碳纤维复合材料试验公共服务平台项目 (项目名称)已由 连云港经济技术开发区管理委员会 (项目审批、核准或备案机关名称)以连开复字【2015】240号(批文名称及编号)批准建设，
2、招标内容
招标项目编号:2187-19420190101L
招标项目名称:碳纤维复合材料试验公共服务平台项目剑杆织机采购
项目实施地点:中国江苏省
招标产品列表(主要设备):
| 序号 | 产品名称 | 数量 | 简要技术规格 | 备注 |
| 1 | 3600mm剑杆织机 | 1 | 10.设备技术数据： Equipment technical data: 10.1设备功能、用途 Equipment function and use: 适用原材料：预氧丝、聚酰亚胺、芳纶长丝，长丝在10dtex-3360dtex； 适应各种工业用布织造。 Applicable raw materials: pre-oxidized silk, polyimide, aramid filament, filament in 10dtex-3360dtex; Adapt to a variety of industrial fabric weA/Ving. 10.2技术要求 Technical requirements *10.2.1 织造品种：芳纶、预氧丝、聚酰亚胺等长丝织物 WeA/Ving varieties: filament fabrics such as aramid, pre-oxidized silk, polyimide, etc. *10.2.2 幅宽：3400mm Width: 3400mm 10.2.3 互动式彩色触摸屏 Interactive colourful touch screen. 10.2.4 织轴直径为1000mm The diameter of the weA/Ving shaft is 1000mm (with warp beam for aramid super reinforced warp beam) *10.2.5 配储纬器切换功能 With weft feeder switching function (one weft feeder can be replaced by another) 10.2.6 机电式独立选纬装置，带4个微机控制选纬指 Electromechanical independent weft selection device with 4 microcomputer control weft selection *10.2.7 超级马达驱动，并全自动寻纬和慢动 Super motor drive, and fully automatic weft and slow motion. *10.2.8 标配无级变速–可以根据每纬调节车速、纬密、经纱张力 Standard stepless speed change - can adjust the speed, weft density and warp tension according to each latitude. 10.2.9卷取装置 Winding device 10.2.9.1 电子卷取，最大卷取直径600mm。 Electronic coiling, the maximum coiling diameter is 600mm. *10.2.9.2 硫化橡胶卷取辊 Vulcanized rubber take-up roll 10.2.9.3预留 机外大卷装，方便机外卷装配置 Reserved (not equipped) large off-machine package for easy off-machine package configuration 10.2.10 带光帘手动保护 Manual protection with light curtain 10.2.11纬密范围4-200根/cm Weft density range 4-200 roots/cm 10.2.12开口、引纬装置 Opening and weft insertion device *10.2.12.1 配史陶比尔S3020型积极式电子多臂开口； With the St？ubli S3020 active electronic multi-arm opening; *10.2.12.2 配8片拉杆，快速接头 ，8片加强型综框并带综丝避震条； With 8 rods, quick joints (can be operated by 1 person), 8 reinforced heald frames with healds; *10.2.12.3 4色，配4个IRO XD X3储纬器； 4-color with 4 IRO XD X3 weft feeders; *10.2.12.4 带纬纱张力控制装置； Belt weft yarn tension control device; *10.2.12.5 剑杆：挠性剑杆，无导钩； Rapier: flexible rapier without guide hooks; *10.2.13 后梁：适合织造芳纶，减少毛丝； Back beam: suitable for weA/Ving aramid and reducing hairline; *10.2.14 配左右侧电子驱动的独立织边装置； Independent weA/Ve device with left and right side electronic drive; *10.2.15 最高转速：≥430rpm； Maximum speed: ≥430rpm; 10.2.16 带钢筘上方照明和织物下方照明； Lighting above the strip and under the fabric; *10.2.17 配备适合芳纶的纬纱剪刀； Equipped with weft yarn scissors suitable for aramid; 10.2.18电源：AC380V±60V,50Hz。 Power supply: AC380V±60V, 50Hz. 10.3机器主要配置 Main configuration of the machine 10.3.1主机一台； One set host; 10.3.2储纬器IRO XD X3 4套，含储纬纱架，控制箱； 4 sets of weft feeder IRO XD X3, including storage weft creel, control box; 10.3.3适合芳纶超级加强型经轴3套； Suitable for 3 sets of aramid super-reinforced warp beam; 10.3.4卷布辊5只； 5 rolls of cloth; 10.3.5 带3万根进口综丝，3万片进口停经片，1片进口钢筘、棕框16片； With 30,000 imported healds, 30,000 imported drop wires, 1 imported steel file and 16 heald frames; 10.3.6剑带左右各5条； 5 strips on the left and right sides of the sword belt; 10.3.7左右剑头5套。 5 sets of sword heads. | |
| 2 | 2500mm剑杆织机 | 1 | 10.设备技术数据： Equipment technical data: 10.1设备功能、用途 Equipment function and use: 适用原材料：预氧丝、聚酰亚胺、芳纶长丝，长丝在10dtex-3360dtex； 适应各种工业用布织造。 Applicable raw materials: pre-oxidized silk, polyimide, aramid filament, filament in 10dtex-3360dtex; Adapt to a variety of industrial fabric weA/Ving. 10.2技术要求 Technical requirements *10.2.1 织造品种：芳纶、预氧丝、聚酰亚胺等长丝织物 WeA/Ving varieties: filament fabrics such as aramid, pre-oxidized silk, polyimide, etc. *10.2.2 幅宽：3400mm Width: 3400mm 10.2.3 互动式彩色触摸屏 Interactive colourful touch screen. 10.2.4 织轴直径为1000mm The diameter of the weA/Ving shaft is 1000mm (with warp beam for aramid super reinforced warp beam) *10.2.5 配储纬器切换功能 With weft feeder switching function (one weft feeder can be replaced by another) 10.2.6 机电式独立选纬装置，带4个微机控制选纬指 Electromechanical independent weft selection device with 4 microcomputer control weft selection *10.2.7 超级马达驱动，并全自动寻纬和慢动 Super motor drive, and fully automatic weft and slow motion. *10.2.8 标配无级变速–可以根据每纬调节车速、纬密、经纱张力 Standard stepless speed change - can adjust the speed, weft density and warp tension according to each latitude. 10.2.9卷取装置 Winding device 10.2.9.1 电子卷取，最大卷取直径600mm。 Electronic coiling, the maximum coiling diameter is 600mm. *10.2.9.2 硫化橡胶卷取辊 Vulcanized rubber take-up roll 10.2.9.3预留 机外大卷装，方便机外卷装配置 Reserved (not equipped) large off-machine package for easy off-machine package configuration 10.2.10 带光帘手动保护 Manual protection with light curtain 10.2.11纬密范围4-200根/cm Weft density range 4-200 roots/cm 10.2.12开口、引纬装置 Opening and weft insertion device *10.2.12.1 配史陶比尔S3020型积极式电子多臂开口； With the St？ubli S3020 active electronic multi-arm opening; *10.2.12.2 配8片拉杆，快速接头 ，8片加强型综框并带综丝避震条； With 8 rods, quick joints (can be operated by 1 person), 8 reinforced heald frames with healds; *10.2.12.3 4色，配4个IRO XD X3储纬器； 4-color with 4 IRO XD X3 weft feeders; *10.2.12.4 带纬纱张力控制装置； Belt weft yarn tension control device; *10.2.12.5 剑杆：挠性剑杆，无导钩； Rapier: flexible rapier without guide hooks; *10.2.13 后梁：适合织造芳纶，减少毛丝； Back beam: suitable for weA/Ving aramid and reducing hairline; *10.2.14 配左右侧电子驱动的独立织边装置； Independent weA/Ve device with left and right side electronic drive; *10.2.15 最高转速：≥430rpm； Maximum speed: ≥430rpm; 10.2.16 带钢筘上方照明和织物下方照明； Lighting above the strip and under the fabric; *10.2.17 配备适合芳纶的纬纱剪刀； Equipped with weft yarn scissors suitable for aramid; 10.2.18电源：AC380V±60V,50Hz。 Power supply: AC380V±60V, 50Hz. 10.3机器主要配置 Main configuration of the machine 10.3.1主机一台； One set host; 10.3.2储纬器IRO XD X3 4套，含储纬纱架，控制箱； 4 sets of weft feeder IRO XD X3, including storage weft creel, control box; 10.3.3适合芳纶超级加强型经轴3套； Suitable for 3 sets of aramid super-reinforced warp beam; 10.3.4卷布辊5只； 5 rolls of cloth; 10.3.5 带3万根进口综丝，3万片进口停经片，1片进口钢筘、棕框16片； With 30,000 imported healds, 30,000 imported drop wires, 1 imported steel file and 16 heald frames; 10.3.6剑带左右各5条； 5 strips on the left and right sides of the sword belt; 10.3.7左右剑头5套。 5 sets of sword heads. |
3、投标人资格要求
投标人应具备的资格或业绩:8. 对投标人的资格要求：
★8.1业绩：投标方所选产品应有类似用户案例，在国内外销售1000台及以上剑杆织机，需要提供合同作为证明文件，投标书中要做相应说明。 :2019-02-18 10:00
投标文件未曾在中国电力招标采购网（www.dlztb.com）上注册会员的单位应先注册。登录成功后根据招标公告的相说明下载投标文件！
项目 联系人：李杨
咨询电话：010-51957458
传真：010-51957412
手机：13683233285
QQ:1211306049
微信：Li13683233285 邮箱：1211306049@qq.com
备注：欲购买招标文件的潜在投标人,注册网站并缴纳因特网技术服务费后，查看项目业主，招标公告，中标公示等，并下载资格预审范围，资质要求，招标清单，报名申请表等。为保证您能够顺利投标，具体要求及购买标书操作流程按公告详细内容为准，以招标业主的解答为准本。
编辑：chinabidd
