投标邀请
清洗机已具备招标条件,项目招标人为中国电子科技集团公司第二十六研究所,资金为国拨,出资比例为100%,资金已落实。北京国科军友工程咨询有限公司()受中国电子科技集团公司第二十六研究所(招标人)的委托,现对该项目进行国际公开招标采购。
1.招标产品的名称、数量及主要技术参数
1.1货物需求一览表
序号 |
货物名称 |
数量 |
交货期 |
交货地点 |
1 |
清洗机 |
壹台 |
合同生效后20周以内 |
境外提供货物的目的港:FOB离制造商工厂最近的国际港口。 |
1.2主要技术参数:
本次购买的清洗机主要用于工艺过程中3英寸~6英寸、厚度0.15mm~0.5mm的晶圆清洗,应满足清洗工艺要求;晶圆清洗采用标准花篮浸泡清洗方式。
主要技术要求包括:
(1)晶圆材料:铌酸锂、钽酸锂、水晶及异质键合晶圆。
(2)尺寸:3"~6"可选。
(3)晶圆厚度:0.15mm~0.5mm。
(4)晶圆表面有机物检测:接触角CA≤10°。
(5)晶圆表面颗粒:
1)直径≥0.12μm的颗粒数≤10@100mm;
2)直径≥90nm的颗粒数≤20@100mm。
(6)温度控制:RT~150℃,精度±1℃。
(7)颗粒度90nm去除率:≥95%。
(8)破片率:<1/100,000。
(9)机械手臂自动传输连续无故障次数:>500。
(10)清洗工艺流程结束,检测晶圆表面有机物和颗粒。
(11)具有兆声、超声清洗功能。
(12)具有液体循环、夹具运动等清洗方式。
(13)编程自动控制。
以上指标仅是招标文件部分指标。
1.3招标编号:GKJY-217183ZH-9107。
2.对投标人的资格要求
2.1 投标人或所代理的产品的制造商为中华人民共和国境外,且产品为全新产品。如为境内代理商,需具备法人资格,并提供有效的营业登记等许可经营的证明文件,必须获得制造商的合法授权,提供制造商授权书。
2.2投标人拟投标产品的投标机型或同系列机型在国内半导体行业有用户。提供设备采购合同(所供产品须为此次投标产品制造厂商出品)、验收合格证和用户单位联系人、电话,以上佐证材料均需加盖投标单位公章。
2.3 本项目不接受联合体投标。
2.4 投标人必须向招标代理机构购买招标文件并进行登记才具有投标资格。
2.5 接受委托参与项目前期咨询和招标文件编制的法人或其他组织不得参加投标。
3.招标文件获取
3.1 凡有意参加投标者,请于2017年11月15日至2017年11月22日(法定公休日、法定节假日除外),每日上午09时至11时,下午02时至04时(北京时间,下同)购买招标文件。
3.2 招标文件售价:每包1000元人民币或150美元(招标文件售后不退)。
3.3 购买招标文件地点:北京市海淀区中关村南大街31号8号楼210室。
4.投标文件的递交
4.1 投标文件递交的截止时间(投标截止时间,下同)为2017年12月5日09时30分,递交地点为重庆市南岸区南坪花园路14号会议室。
4.2 逾期送达的或者未送达指定地点的投标文件,招标人不予受理。
5.开标
开标时间同投标文件递交截止时间,开标地点同投标文件递交地点。
6.发布公告的媒介
本次招标公告在“中国电力招标采购网”(www.chinabidding.com)和“中国中国电力招标采购网”(www.dlztb.com)上发布。
7.联系方式
招标代理机构: |
北京国科军友工程咨询有限公司 |
地 址: |
北京市海淀区中关村南大街31号8号楼二层 |
邮 编: |
100081 |
联 系 人: |
门蒙蒙 |
电 话: |
010-68196113 |
传 真: |
010-68118720 |
电子邮件: |
gkzb59518823@163.com |
Invitation for Bids
清洗机has been qualified for bid invitations.The Tenderee is Institute of China eleronics technology group co., LTD. 26. The proje funded all by state funding which has been in place. Entrusted by Institute of China eleronics technology group CO., LTD. 26(Tenderee), Beijing Guoke Junyou Engineering Consulting Co., Ltd.(Tendering Agent) is responsible for international competitive bidding procurement on this proje.
Name, Quantity and maintechnical parametersof the bidding produ
1.Produ Name, Quantity, and Main technical parameters
1.1 Schedule of Produ Demands
No. |
Produ Name |
Quantity |
Due Date |
Place of Delivery |
1 |
清洗机 |
one set |
Within 20 weeks after the contra comes into effe |
Destination port for goods offered from outside PRC customs territory: FOB The nearest international port from manufaurer faory |
1.2Main technical parameters: Referring to Seion 8 of IFB (Invitation For Bids)
1.3 Bidding No.:GKJY-217183ZH-9107。
2. Qualification Requirements for Bidder
2.1The manufaurer of a tenderer or agent is outside the territory of the People's Republic of China, and the produs are brand new produs. As agents for the domestic, need to hA/Ve the legal person status, and provide a valid proof of business registration and permission to operate the, you hA/Ve to get the manufaurer's authorized, provide the manufaurer authorization letter.
2.2 The model or the same series machines of the produ should be used by the domestic semiconduor industry users. It should provide valid proof materials including but not limited to user conta (phone), contras, acceptance reports, etc. All the above mentioned materials shall be stamped with official seal of the bidder.
2.3The proje does not accept bids from the consortium.
2.4The bidder must purchase the tender documents from the procuratorial agency and register to be eligible for the bid.
2.5The legal person or other organization that has been entrusted to participate in the pre-proje consultation and bidding documents shall not participate in the tender.
3. Acquisition of IFB (Invitation For Bids) documents
3.1 For those who wish to participate in this bidding aivity, please purchase the IFB documents at 9:00 am to 11:00 am or 2:00 pm to 4:00 pm (Beijing Time, the same below) each business day from Nov. 15, 2017 to Nov. 22, 2017(except Statutory weekend and holidays).
3.2 Prices of IFB documents: RMB 1,000 or US $ 150for one complete set of package.8th
3.3Place of purchasing IFB documents: Meeting room 210, the 8th Building, 31th, Zhongguancun south street, Haidian Distri, Beijing, China.
4. Bid Submission
4.1 Deadline for Bid Submission (Tendering deadline, the same below) is at 9:30am, Dec. 5, 2017. Add.: Meeting room, 14th, Nanping garden road, Nan an distri, Chongqing, China.
4.2 Overdue or not to the designated location that IFB documents are submitted, the Tenderee will not accept the bid document.
5. Bid Opening
5.1 Time of Bid Opening is the same as Bid Submission deadline .
Add. of Bid Opening is the same as Bid Submission add.
6. Medium of Bidding Announcement
This bidding announcement shall be issued on“www. Chinabidding.com”and“www. Chinabidding.com.cn”.
7. Conta
Tendering Agent: |
Beijing Guoke Junyou Engineering Consulting Co., Ltd. |
Add.: |
Second floor, the 8th Building, 31th, Zhongguancun south street, Haidian Distri, Beijing, China. |
Zip Code: |
100081 |
Conta: |
Mengmeng Men |
Tel: |
010-68196113 |
Fax: |
010-68118720 |
Email: |
gkzb59518823@163.com |